These concealed fittings allow work surfaces to be connected rapidly and securely. They are great for joining countertop sections together. The semi-circular fastening elements are pressed against the recess walls as tension is applied. Fits in a 35mm (1-3/8″) flat bottomed hole drilled 3/4″ deep. Use a router with a 1/4″ straight bit to connect holes. Hole spacing on the small connector is 2-1/2″ to 3-1/4″.
Features:

• Easily installed and quickly assembled for material from 19 mm (3/4″)

• By providing even pressure between the surface joint pieces, this fastener holds without glue

• The joint can be disassembled if necessary

• Length 2 5/8″

• Zinc plated steel, galvanized