A 9.5mm B 23.8mm C 12.7mm D 41.0mm

The STACK SYSTEM is designed to machine both the long sections of the style and rail and rail end to make the joint complete using only ONE bit.

When used in conjunction with a router table this bit can be either lowered to cut the rail end or with the use

of a block spacer on the router table no adjustment would be necessary.

You do not have to disassemble and reverse the unit, as you do with 2pc systems.

Available in 1/2 shank only.

Capacity timber thickness 16- 23mm

Revised 9/05/2024